Forks are rated up to 3,000#'s
This version can be used on either a tractor or skidsteer.
VERSATILITY: The word that best describes the all-new and updated Tele-fork. The Tele-fork is a Portable Forklift Mast that will mount on the front of most skid steer loaders and compact tractors that are equipped with a quick-tach front-end loader system.
This mast comes in two different models. The first is a Dedicated Skid Steer unit. This straight skid steer version allows the center of lift to be closer to the skid steer. It also offers a low profile - fold-down back rack. The second is a Conversion Unit. With this unit, the attachment plate can be removed. This allows for a quick hook up to the 3pt. of a tractor. Both units take only minutes to attach.
The new Tele-fork allows the operator to lift past the usual 8-12' reach of a skid steer an additional 6ft. The 42" - and optional 48" - forklift teeth are rated to 3000#'s.
The new Tele-fork is ideal for use in factories and warehouses, as well as in the masonry and construction industries. It has a low profile back-rack and great clearance. This Tele-fork will increase productivity while decreasing down time.
Standard forks measure 42" X 1½"X 4" class II standard taper with 16" rail spacing.
Tipping load depends on skidsteer model & specifications.
Tele-fork comes totally assembled except hydraulic couplers & hoses for connecting to skidsteer.
|604-0-0600||TELE-FORK - DEDICATED SKIDSTEER||780#|
|604-0-0005||TELE-FORK - COMBINATION SKIDSTEER & 3-POINT TRACTOR||1100#|
Dedicated Skidsteer version: Dimensions: Height before extending is 92" - Width 52½". 1½" x 42" forks rated at 3,000 lbs. on 24" load Center - Class II standard taper, w/ 16" rail spacing. 2½" x 36" stroke hydraulic cylinder. Includes (2) 48" hoses and couplers with 90 degree elbows. Rated lift capacity depends on skidsteer model and specifications - Relief Valve set to lift 1500 lbs.
Combination Skidsteer / 3-pt. Unit - simply remove the skidsteer attachment plate and hook to tractor's rear 3-pt. link in minutes (fits category II, III, III narrow). Unit does not include cylinder for top 3-pt. link or hoses and couplers (inquire at dealer). Rated Lift capacity depends on skidsteer model and specifications. Both units are equipped with standard 42" x 1-½" x 4" forks, class II standard taper, w/ 16" rail spacing, rated at 4,500lbs on 24" load center.
|604-1-0101||48" X 1½" X 4" forks||214#|
|604-1-0102||60" X 1¾" X 4" forks||318#|