Handle with pivot wheels.
The hopper is 11" high x 60" long x 32" wide. That's BIG!
Low Profile Hopper
The hopper is 11" high x 60" long x 32" wide and is a proven grain handling performer.
The hopper tube is 6' long and comes in 8", 10" and 13" diameters. Other tube lengths are available on request (up to 12').
Top Rubber Extension Flap
Increases hopper capacity and allows lower hopper height to accommodate use with any truck and most hopper bottoms.
|100-0-4680||8" Ultra Low-Profile Hopper, Electric Drive* (Less Motor)||300#|
|100-0-4681||8" Ultra Low-Profile Hopper, Hydraulic Drive** (Less Motor)||295#|
|100-0-4682||10" Ultra Low-Profile Hopper, Electric Drive** (Less Motor)||370#|
|100-0-4683||10" Ultra Low-Profile Hopper, Hydraulic Drive** (Less Motor)||365#|
|100-0-4684||13" Ultra Low-Profile Double Flighting Hopper, Electric Drive** (Less Motor)||650#|
|100-0-4685||13" Ultra Low-Profile Double Flighting Hopper, Hydraulic Drive** (Less Motor)||650#|
|904-05003||Hydraulic Motor for above||13#|
NOTE: Other hopper tube lengths available upon request up to 12 feet.
*Electric motor drives include motor mounting base, 1½ double groove pully, belts and belt shield. Not included is the motor or motor pulley. Recommended motor pully is 3" to 3½" double groove.
**Hydraulic drive is less motor and hoses. Tractor should provide 10-12 GPM at 1500 PSI to operate the hopper at full capacity. To achive maximum performance on the hopper run the jump auger between 400-500 RPM.